Advanced Technology Program NIST Home Page

Track 5: MATERIALS and MANUFACTURING

Engineered Surfaces

Large-Scale Intelligent Composite Systems

Condition-Based Maintenance (CBM)

Submicron Micromachining

Innovative Forming Techniques

Advanced Construction Materials and Processes

Return to Program  Return to Program for 1999 ATP National Meeting

 

AGENDA:
Large-Scale Intelligent Composite Systems
Monday, November 15, 1999
9:30 p.m. ATP Proposers' Conference
12:30 p.m.   Lunch
1:30 p.m. Introduction and Welcome (Phase I)
H. Felix Wu, Program Manager, ATP

Chairperson:
David Stewart, Stewart Automotive Research
1:35 p.m. STRATA Composite Structures - ATP Partners Drive Technology Commercialization
Tim Herr and Wayne Kirk, Advance USA
2:00 p.m. Vapor-Grown Carbon-Fiber Composites for Automotive Applications
Gerald Glasgow, Applied Sciences, Inc.
2:30 p.m. Challenges and Opportunities in Engineering Thermoplastics Recycling
Darren Arola, MBA Polymers, Inc.
Chairperson:
Chris Lundberg, Hydril Company
3:00 p.m. The Application of Advanced Composite Technology to Marine Drilling Riser - An Industry, University, NIST Partnership
Bill Andersen, Northrop Grumman
3:30 p.m. Development of Composite Production Risers - Cost and Reliability
Doug Johnson, Lincoln Composites
Chairperson:
Abdul-Hamid Zureick, Georgia Institute of Technology
4:00 p.m. Designing, Developing and Installing FRP Beams for Tomorrow's Bridges
Dan Witcher and Glenn Barefoot, Strongwell Corporation
4:30 p.m. 3-D Fiber Deposition Processing: The Development of Near-Isotropic Composite Bar Stock
David Johnson, Ebert Composites Corporation
5:00 p.m. Development of a Low Cost Recyced Polymer Composite Railroad Crosstie
Bill Jarvis, Seaward International, Inc.
Tuesday, November 16, 1999
8:30 a.m. Introduction and Welcome (Phase II)
H. Felix Wu, Program Manager, ATP
8:45 a.m. Keynote: Integrated Design-Manufacturing Technologies for Composites
Stephen Tsai, Stanford University
9:30 a.m. Remaining technical challenges in Automotive Industry
Kenneth Rusch, Budd Company
Manish Mehta, ERIM, Inc.
10:00 a.m. Remaining technical challenges in Offshore Exploration and Production
Him Lo, Shell E&P
10:20 a.m. Remaining technical challenges in Civil Infrastructure
Doug Barno, Market Development Alliance
10:40 - 11:00 a.m.   Coffee Break
11:00 p.m. Panel Discussions
Richard Parnas, Polymers Division, NIST (Moderator)
  • David Steenkamer, Ford Research Laboratory
  • Nick Gianaris, Ford Motor Company/Visteon Chassis Systems
  • Him Lo, Shell E&P
  • Jerry Williams, CEAC/UH
  • Charles McClaskey, Reichhold Chemicals
  • John Hooks, FHWA
12:30 - 1:30 p.m.   Lunch
1:30 p.m. Breakout Sessions:
    Automotive:
    Discussion Leader: Kenneth Rusch, Budd Company

    Offshore E&P:
    Discussion Leader: Jerry Williams, CEAC/UH

    Civil Infrastructure:
    Discussion Leader: Charles McClaskey, Reichhold Chemicals

3:30 p.m. Report Summary
4:15 p.m. Review of ATP Criteria for a Competitive Proposal
H. Felix Wu, Program Manager, ATP
4:45 p.m. Wrap Up
5:00 p.m. Adjourn

Go to Top  Go to top of document

ATP Home Page NIST Home Page
ATP website comments: webmaster-atp@nist.gov • Technical ATP inquiries: InfoCoord.ATP@nist.gov

Privacy policy / security notice / accessibility statement • NIST Disclaimer • NIST Information Quality Standards

NIST is an agency of the U.S. Commerce Department's Technology Administration.